M62-M65: Auxiliary outputs / PLC
Turns auxiliary digital outputs on or off for fixtures, air blast, sensors or automation.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Automation
- Machine
- Milling, Turning, Mill-turn, Laser/cut
- Risk
- High
- Example
- M62 P1 / M63 P1 / M64 P2 / M65 P2
M62 P1 / M63 P1 / M64 P2 / M65 P2Parameters
- P
- Número de la salida (relé) que se activa (M62/M64) o desactiva (M63/M65).
Machine: Milling, Turning, Mill-turn, Laser/cutRisk: High
Fanuc · ISO común
- Fanuc: The actual meaning depends on the builder's PLC.
- ISO común: Never assume equivalence by M-code number without the machine table.
Other codes in Automation
Frequently Asked Questions (FAQ)
What does M62-M65 mean in a CNC program?
Turns auxiliary digital outputs on or off for fixtures, air blast, sensors or automation. In the catalogue it appears as "Auxiliary outputs / PLC", within the Automation family.
Can you give me an example of M62-M65?
M62 P1 / M63 P1 / M64 P2 / M65 P2 — Turns auxiliary digital outputs on or off for fixtures, air blast, sensors or automation.
Which machines use M62-M65?
M62-M65 is used in: Milling, Turning, Mill-turn, Laser/cut.
What should you watch out for with M62-M65?
High risk: a mistake here can cause a crash, a broken tool or an out-of-tolerance part. Simulate the program and dry-run it before cutting.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.