M60: Pallet change
Request a change of pallet or table in machines equipped with a changer.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Automation
- Machine
- Milling, Mill-turn
- Risk
- High
- Example
- M60
M60Machine: Milling, Mill-turnRisk: High
Fanuc · Haas
- Fanuc: PLC and cell dependent function; validate interlocks.
- Haas: Used on machines with compatible pallet changer.
Other codes in Automation
Frequently Asked Questions (FAQ)
What does M60 mean in a CNC program?
Request a change of pallet or table in machines equipped with a changer. In the catalogue it appears as "Pallet change", within the Automation family.
Can you give me an example of M60?
M60 — Request a change of pallet or table in machines equipped with a changer.
Which machines use M60?
M60 is used in: Milling, Mill-turn.
What should you watch out for with M60?
High risk: a mistake here can cause a crash, a broken tool or an out-of-tolerance part. Simulate the program and dry-run it before cutting.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.