Okuma G107: OSP cylindrical interpolation
Enables cylindrical interpolation on Okuma OSP lathes: converts the C-axis angular motion into linear motion on the surface.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Okuma manufacturer
- Machine
- Turning, Mill-turn
- Risk
- High
- Example
- G107 C... Z... F...
G107 C... Z... F...Machine: Turning, Mill-turnRisk: HighManufacturer: Okuma
ISO común · Fanuc
- ISO común: Conceptual equivalence to G07.1/G107 Fanuc; verify OSP parameters and cylinder radius.
- Fanuc: Fanuc uses G07.1 / G107 with a different syntax.
Other codes in Okuma manufacturer
Frequently Asked Questions (FAQ)
What does Okuma G107 mean in a CNC program?
Enables cylindrical interpolation on Okuma OSP lathes: converts the C-axis angular motion into linear motion on the surface. In the catalogue it appears as "OSP cylindrical interpolation", within the Okuma manufacturer family.
Can you give me an example of Okuma G107?
G107 C... Z... F... — Enables cylindrical interpolation on Okuma OSP lathes: converts the C-axis angular motion into linear motion on the surface.
Which machines use Okuma G107?
Okuma G107 is used in: Turning, Mill-turn.
What should you watch out for with Okuma G107?
High risk: a mistake here can cause a crash, a broken tool or an out-of-tolerance part. Simulate the program and dry-run it before cutting.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.