Haas G107: Cylindrical mapping
Maps movements on a cylindrical surface for engraving or surround machining.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Haas manufacturer
- Machine
- Milling, Mill-turn
- Risk
- High
- Example
- G107 A0 Q50
G107 A0 Q50Parameters
- A / B / C
- Eje rotativo sobre el que se desenrolla el cilindro.
- Q
- Diámetro del cilindro. · mm
- R
- Radio del cilindro (alternativa a Q). · mm
Machine: Milling, Mill-turnRisk: HighManufacturer: Haas
Haas
G107 ...- Requires rotary axis/correct configuration; Always simulate.
Other codes in Haas manufacturer
Frequently Asked Questions (FAQ)
What does Haas G107 mean in a CNC program?
Maps movements on a cylindrical surface for engraving or surround machining. In the catalogue it appears as "Cylindrical mapping", within the Haas manufacturer family.
How is Haas G107 written on each control?
Haas: G107 .... The exact syntax depends on the control version and the machine parameters: always confirm with the manufacturer's manual.
Can you give me an example of Haas G107?
G107 A0 Q50 — Maps movements on a cylindrical surface for engraving or surround machining.
Which machines use Haas G107?
Haas G107 is used in: Milling, Mill-turn.
What should you watch out for with Haas G107?
High risk: a mistake here can cause a crash, a broken tool or an out-of-tolerance part. Simulate the program and dry-run it before cutting.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.