M31/M33: Haas chip conveyor
Activates or stops chip conveyor/auger on compatible Haas machines.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Haas manufacturer
- Machine
- Milling, Turning, Mill-turn
- Risk
- Low
- Example
- M31 / M33
M31 / M33Machine: Milling, Turning, Mill-turnRisk: LowManufacturer: Haas
Haas
- M31 usually starts the chip auger; M33 stops it on many Haas controls.
Other codes in Haas manufacturer
Frequently Asked Questions (FAQ)
What does M31/M33 mean in a CNC program?
Activates or stops chip conveyor/auger on compatible Haas machines. In the catalogue it appears as "Haas chip conveyor", within the Haas manufacturer family.
Can you give me an example of M31/M33?
M31 / M33 — Activates or stops chip conveyor/auger on compatible Haas machines.
Which machines use M31/M33?
M31/M33 is used in: Milling, Turning, Mill-turn.
What should you watch out for with M31/M33?
Low risk: it is a state instruction that rarely causes damage on its own, although it is worth writing it out so you do not depend on the machine's previous state.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.