Haas M88/M89: Coolant through Haas spindle
Turns through-spindle coolant on or off on Haas machines equipped with TSC.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Haas manufacturer
- Machine
- Milling, Mill-turn
- Risk
- Medium
- Example
- M88 / M89
M88 / M89Machine: Milling, Mill-turnRisk: MediumManufacturer: Haas
Haas
M88 / M89- Requires TSC option installed and compatible tool.
- Confirm pressure, filtration and coolant outlet before using deep-hole drills or small tools.
Fanuc
- On other M88/M89 machines they may mean another PLC function.
Related:
Other codes in Haas manufacturer
Frequently Asked Questions (FAQ)
What does Haas M88/M89 mean in a CNC program?
Turns through-spindle coolant on or off on Haas machines equipped with TSC. In the catalogue it appears as "Coolant through Haas spindle", within the Haas manufacturer family.
How is Haas M88/M89 written on each control?
Haas: M88 / M89. The exact syntax depends on the control version and the machine parameters: always confirm with the manufacturer's manual.
Can you give me an example of Haas M88/M89?
M88 / M89 — Turns through-spindle coolant on or off on Haas machines equipped with TSC.
Which other codes is Haas M88/M89 combined with?
In practice Haas M88/M89 appears alongside these codes: M08/M09, M07. It is worth reading them together, because the state one leaves behind conditions what the next one does.
Which machines use Haas M88/M89?
Haas M88/M89 is used in: Milling, Mill-turn.
What should you watch out for with Haas M88/M89?
Medium risk: it rarely breaks anything on its own, but a wrong value shows up on the part. Check the block before running the batch.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.