Haas G110-G129: Legacy Haas extended offsets
Selects extended coordinate systems #7 to #26 on legacy Haas controls.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Haas manufacturer
- Machine
- Milling, Mill-turn
- Risk
- High
- Example
- G110
G110Machine: Milling, Mill-turnRisk: HighManufacturer: Haas
Haas
G110 ... G129- On modern Haas controls G154 P1-P99 is usually preferred.
Other codes in Haas manufacturer
Frequently Asked Questions (FAQ)
What does Haas G110-G129 mean in a CNC program?
Selects extended coordinate systems #7 to #26 on legacy Haas controls. In the catalogue it appears as "Legacy Haas extended offsets", within the Haas manufacturer family.
How is Haas G110-G129 written on each control?
Haas: G110 ... G129. The exact syntax depends on the control version and the machine parameters: always confirm with the manufacturer's manual.
Can you give me an example of Haas G110-G129?
G110 — Selects extended coordinate systems #7 to #26 on legacy Haas controls.
Which machines use Haas G110-G129?
Haas G110-G129 is used in: Milling, Mill-turn.
What should you watch out for with Haas G110-G129?
High risk: a mistake here can cause a crash, a broken tool or an out-of-tolerance part. Simulate the program and dry-run it before cutting.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.