Haas G136: Automatic center of origin measurement
Automatic measurement function to locate center/origin with probe according to Haas option.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Haas manufacturer
- Machine
- Milling, Mill-turn
- Risk
- High
- Example
- G136 ...
G136 ...Machine: Milling, Mill-turnRisk: HighManufacturer: Haas
Haas
- Requires probe, macros/option and correct calibration.
Other codes in Haas manufacturer
Frequently Asked Questions (FAQ)
What does Haas G136 mean in a CNC program?
Automatic measurement function to locate center/origin with probe according to Haas option. In the catalogue it appears as "Automatic center of origin measurement", within the Haas manufacturer family.
Can you give me an example of Haas G136?
G136 ... — Automatic measurement function to locate center/origin with probe according to Haas option.
Which machines use Haas G136?
Haas G136 is used in: Milling, Mill-turn.
What should you watch out for with Haas G136?
High risk: a mistake here can cause a crash, a broken tool or an out-of-tolerance part. Simulate the program and dry-run it before cutting.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.