Haas G150: General pocket via subprogram
Haas cycle to machine pockets using an applet to define the geometry.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Haas manufacturer
- Machine
- Milling, Mill-turn
- Risk
- Medium
- Example
- G150 P100 Z-10 Q2 R1 F300
G150 P100 Z-10 Q2 R1 F300Parameters
- P
- Número del subprograma que define el contorno de la cajera.
- Z
- Profundidad final de la cajera. · mm
- Q
- Profundidad de cada pasada. · mm
- R
- Plano de referencia. · mm
- I / J
- Desbaste en X (I) o en Y (J): anchura de pasada. · mm
- K
- Creces para el acabado. · mm
- D
- Corrector de radio de la fresa.
- F
- Avance de corte. · mm/min con G94, mm/vuelta con G95 (en torno suele ser el modo por defecto)
Machine: Milling, Mill-turnRisk: MediumManufacturer: Haas
Haas
G150 P... Z... I... J... K... Q... D... R... F...- Validate contour subprogram and machining direction.
Other codes in Haas manufacturer
Frequently Asked Questions (FAQ)
What does Haas G150 mean in a CNC program?
Haas cycle to machine pockets using an applet to define the geometry. In the catalogue it appears as "General pocket via subprogram", within the Haas manufacturer family.
How is Haas G150 written on each control?
Haas: G150 P... Z... I... J... K... Q... D... R... F.... The exact syntax depends on the control version and the machine parameters: always confirm with the manufacturer's manual.
Can you give me an example of Haas G150?
G150 P100 Z-10 Q2 R1 F300 — Haas cycle to machine pockets using an applet to define the geometry.
Which machines use Haas G150?
Haas G150 is used in: Milling, Mill-turn.
What should you watch out for with Haas G150?
Medium risk: it rarely breaks anything on its own, but a wrong value shows up on the part. Check the block before running the batch.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.