Haas G174/G184: Rigid non-vertical threading
Haas special non-vertical rigid threading cycles in CCW/CW direction.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Haas manufacturer
- Machine
- Milling, Mill-turn
- Risk
- High
- Example
- G184 X... Y... Z... F...
G184 X... Y... Z... F...Machine: Milling, Mill-turnRisk: HighManufacturer: Haas
Haas
G174 / G184- Requires correct multi-axis orientation and rigid threading enabled.
Other codes in Haas manufacturer
Frequently Asked Questions (FAQ)
What does Haas G174/G184 mean in a CNC program?
Haas special non-vertical rigid threading cycles in CCW/CW direction. In the catalogue it appears as "Rigid non-vertical threading", within the Haas manufacturer family.
How is Haas G174/G184 written on each control?
Haas: G174 / G184. The exact syntax depends on the control version and the machine parameters: always confirm with the manufacturer's manual.
Can you give me an example of Haas G174/G184?
G184 X... Y... Z... F... — Haas special non-vertical rigid threading cycles in CCW/CW direction.
Which machines use Haas G174/G184?
Haas G174/G184 is used in: Milling, Mill-turn.
What should you watch out for with Haas G174/G184?
High risk: a mistake here can cause a crash, a broken tool or an out-of-tolerance part. Simulate the program and dry-run it before cutting.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.