Haas G77: Back bore / flatting cycle
Back boring on the mill or a flatting cycle with a live tool on the lathe, per Haas.
For reference only: syntax changes with the control, the post-processor and the machine parameters. Check the official manual and run a simulation before cutting. Legal notice.
- Family
- Haas manufacturer
- Machine
- Milling, Turning, Mill-turn
- Risk
- High
- Example
- G77 ...
G77 ...Machine: Milling, Turning, Mill-turnRisk: HighManufacturer: Haas
Haas
- Meaning depends on mill/lathe machine; validate exact format.
Other codes in Haas manufacturer
Frequently Asked Questions (FAQ)
What does Haas G77 mean in a CNC program?
Back boring on the mill or a flatting cycle with a live tool on the lathe, per Haas. In the catalogue it appears as "Back bore / flatting cycle", within the Haas manufacturer family.
Can you give me an example of Haas G77?
G77 ... — Back boring on the mill or a flatting cycle with a live tool on the lathe, per Haas.
Which machines use Haas G77?
Haas G77 is used in: Milling, Turning, Mill-turn.
What should you watch out for with Haas G77?
High risk: a mistake here can cause a crash, a broken tool or an out-of-tolerance part. Simulate the program and dry-run it before cutting.
Related tools
CNC G-code Simulator
CNC IDE: editing with G/M tooltips, line inspector, conversion between controls and 2D/3D toolpath.
CNC Alarms Guide
CNC Alarms and Solutions Guide. Enter the error code or symptom to find the cause and how to repair it at the machine.
Calculate cycle time
Estimate CNC turning and milling cycle time from G-code. Calculate parts per hour with a breakdown of cutting, rapids, canned cycles and tool changes.